Cisco Webex 840, Manual

Page: 108 / 160

Table 56: ScanFlex Settings
Description Default Field Type Or
Choices Field
Enter a name for the application or activity.
If more than one name, use a comma to
separate names.
String Application or
activity name(s)
Set desired symbology settings for the
application or activity. Symbology settings
for application(s)
entered above
Select desired symbologies, and set their
data manipulation and custom intent
settings. Format data
Select desired symbologies, and set custom
actions and parameters. Advanced data
formatting
Related Topics
Default Settings for the Barcode App , on page 86
Actions for Advanced Data Formatting
In the ScanFlex Advanced data formatting settings, you can set the scanner to perform up to ten different
Actions on a scanned string. You can set the Actions to happen in any order, and you may repeat an Action
if needed.
Each Action has two parameters that are associated with it: Parameter 1 and Parameter 2. The parameter fields
may not be necessary for some actions.
The following table describes actions that move the cursor.
Table 57: Actions That Move the Cursor
Directions for Parameters Cursor Action Description Action
Enter
n
in Parameter 1. Move the cursor forward by
n
spots.
Move forward
Enter
n
in Parameter 1. Move the cursor backward by
n
spots.
Move back
No parameter required. Move the cursor to the beginning
of the string. Move to beginning
No parameter required. Move the cursor to the end of the
string. Move to end
Enter the sub-string in Parameter
1. Move the cursor to the beginning
of a sub-string. Move to beginning of sub-string
Enter the sub-string in Parameter
1. Move the cursor to the end of a
sub-string. Move to the end of sub-string
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
100
Cisco App Configuration
Actions for Advanced Data Formatting