Cisco Webex 840 Manual Download Page 81

Page: 81 / 160

For the PTT functionality to work on your network, you must enable the multicast feature on your access
points. For detailed information, see the

Webex Wireless Phone 840 and 860 Wireless LAN Deployment

Guide

By default, PTT is disabled. As system administrator, you:

• Enable or disable PTT mode.

• Subscribe users to some or all the 25 available channels to receive, and optionally transmit, broadcasts.

, on page 65

User Settings for Push to Talk

The user controls the following Push to Talk (PTT) settings on the phone.

Table 15: User Settings for PTT

Description

Default

Field Type Or
Choices

Field

Controls the volume percentage of the PTT
volume.

Integer 0–100

PTT volume

The user sets their default channel. The
default channel is the channel that
broadcasts when the user presses the
programmed

PTT

button or the

Talk

button in the

PTT

app.

A user can set a channel as their default
channel only if they are subscribed to the
channel and are able to transmit on the
channel.

Channel 1 - ALL

Channels that have
both

Channel can

transmit

and

Channel
subscription

Admin

settings set to

Yes

Default channel

Admin Settings for Push to Talk

Use the following Admin settings to configure Push to Talk (PTT).

Table 16: Admin Settings for PTT

Description

Default

Field Type Or
Choices

Field

PTT must be enabled for it to be activated
on the selected handsets.

Off

Enable PTT

From release 1.3 onward, you can set PTT
to transmit even if the phone is locked.

Off

Allow PTT
transmission when
phone is locked

Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager

Cisco App Configuration

User Settings for Push to Talk

Summary of Contents for Webex 840

































































































































































Search results

Summary of Contents for Webex 840

Reviews:

Related manuals for Webex 840

Brands by name

Popular brands

Cisco Webex 840, Manual

Search results

Summary of Contents for Webex 840

Reviews:

Related manuals for Webex 840

Brands by name

Popular brands