Cisco WAE-674-K9 - Wide Area Application Engine 674, Hardware Installation Manual, Page: 124 / 152

Chapter 6 Troubleshooting the System Hardware
Symptoms and Solutions
6-50
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
151 Real-time clock error.
1.
Check the battery.
2.
Check the system board.
161 Real-time clock battery error.
1.
Check the battery.
2.
Check the system board.
162 Device configuration error.
1.
Run the Configuration/Setup Utility program,
choose
Load Default Settings , and save the
settings.
2.
Check the battery.
3.
Check for failing device.
4.
Check the system board.
163 Real-time clock error (time of day
not set).
1.
Run the Configuration/Setup Utility program,
choose
Load Default Settings , make sure that
the date and time are correct, and save the
settings.
2.
Check the battery.
3.
Check the system board.
175 Hardware error. Check the system board.
184 Power-on password damaged.
1.
Restart the device and enter the administrator
password; then, run the Configuration/Setup
Utility program, choose
Load Default
Settings , and save the settings.
2.
Check the battery.
3.
Check the system board.
187 VPD serial number not set. Check the system board.
189 An attempt was made to access the
device with invalid passwords. Check your passwords.
289 DIMM disabled by POST or user. Check for a disabled DIMM, if not disabled by
the user.
Table 6-20 POST Error Codes (continued)
Error Code Symptom Cause and Action