6-39
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
Chapter 6 Troubleshooting the System Hardware
Symptoms and Solutions
202-XXX-00n
Failed system cache test.
n = APIC ID for failing
microprocessor:
•
0, 1, 2, 3 = microprocessor 1
•
4, 5, 6, 7 = microprocessor 2
1.
Reflash or update firmware to the latest
level.
2.
Check VRM if
n
= 4, 5, 6, or 7.
3.
Check the indicated microprocessor.
215-XXX-000
Failed CD-RW/DVD drive test.
1.
Run the test again with a different
CD-RW/DVD drive.
2.
Reseat the CD-ROM drive.
3.
Reseat the operator information panel
assembly.
217-198-XXX
Could not establish drive
parameters.
1.
Check the hard disk drive signal cable.
2.
Reseat the hard disk drive.
3.
Check the hard disk drive backplane.
4.
Check the hard disk drive.
217-XXX-00n
Failed fixed disk test.
n is the number of the failed
drive. The hard disk drive
numbers are on the front bezel.
1.
Reseat the hard disk drive indicated by
n
.
2.
Replace the hard disk drive indicated by
n
.
301-XXX-000
Failed keyboard
2
test.
After installing a USB keyboard,
you might have to use the
Configuration/Setup Utility
program to enable keyboardless
operation and prevent the POST
error message 301 from being
displayed during startup.
1.
Reseat the keyboard cable.
2.
Check the system board.
Table 6-9
Error Code Definitions (continued)
Error Code
Problem
Action
Summary of Contents for WAE-674-K9 - Wide Area Application Engine 674
Page 4: ......