Cisco VGD-1T3 Software Configuration Manual Download Page 125 | Manualshive

Page: 125 / 232

background image

Configuring the Cisco VGD 1T3 Voice Gateway as an H.323 or SIP Gateway

Configuring SIP Gateways

115

Cisco VGD 1T3 Voice Gateway Software Configuration Guide

Performing a Basic SIP Configuration

To complete a basic SIP configuration on the Cisco VGD 1T3 voice gateway, you must perform the
following tasks:

•

Configuring SIP VoIP Services

•

Configuring SIP Register Support

•

Configuring SIP Redirect Processing Enhancement

•

Configuring SIP 300 Multiple Choice Messages

•

Verifying SIP Gateway Status

Detailed instructions for completion of these tasks are provided in the

Basic SIP Configuration

chapter

of the

Cisco IOS SIP Configuration Guide.

Configuration Examples for Basic SIP Configuration

To see configuration examples for the following components of basic SIP configuration, refer to the

Basic SIP Configuration

chapter of the

Cisco IOS SIP Configuration Guide

:

•

SIP Register Support

•

SIP Redirect Processing Enhancement

•

SIP 300 Multiple Choice Messages

CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, the Cisco logo, DCE, and Welcome to the
Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar,
Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified
Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration
Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient,
IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone,
MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect,
ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and
the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply
a partnership relationship between Cisco and any other company. (0807R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and
coincidental.

© 2008 Cisco Systems, Inc. All rights reserved.

«
...
123
124
125
126
127
...
»

Summary of Contents for VGD-1T3









































































































































































































































Reviews:

No comments

Related manuals for VGD-1T3

FXO - RECORD NEW GREETING

Brand: WELLTECH Pages: 2

Brand: Hypercom Pages: 2

Brand: Net2Phone Pages: 129

Brand: RTA Pages: 43

Brand: IOGear Pages: 2

Brand: ATX Pages: 84

MediaPack 1 Series

Brand: AudioCodes Pages: 10

MediaPack MP-112

Brand: AudioCodes Pages: 622

Brand: Omnio Pages: 19

SureCross Performance GatewayPro Series

Brand: Banner Pages: 8

Ethernet Gateway V4

Brand: Packet Power Pages: 2

Brand: Technicolor Pages: 114

Brand: Vertical Pages: 42

Brand: ICPDAS Pages: 104

Brand: Kiwi Pages: 60

Brand: 2N Pages: 5

Brand: 2N Pages: 33

Brand: 2N Pages: 117

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands