![background image](http://html.mh-extra.com/html/cisco/vgd-1t3/vgd-1t3_software-configuration-manual_65018045.webp)
Verifying Basic Setup on the Cisco VGD 1T3 Voice Gateway
Initial Running Configuration
35
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Initial Running Configuration
The Cisco IOS software creates an initial running configuration. To display the configuration for review
so you can get familiar with the default settings, enter Privileged EXEC mode and the show
running-config command as follows. User input is shown in boldface type.
Router>
enable
Password:
Router#
show running-config
Building configuration...
Current configuration : 7653 bytes
!
version 12.4
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
no boot startup-test
logging rate-limit console 10 except errors
!
!
resource-pool disable
!
!
voice-card 2
!
voice-card 3
!
voice-card 4
!
mta receive maximum-recipients 0
!
!
controller T3 1/0
!
!
interface GigabitEthernet0/0
ip address 172.21.101.21 255.255.255.0
no ip route-cache
no ip mroute-cache
duplex auto
Table 1
show version Command Field Descriptions
Field
Description
VGD 1T3 uptime is....
Watch for unscheduled reloads by inspecting this
field.
System returned to ROM by reload at....
This line tells you why the gateway last reloaded.
If the field displays “power-on,” a power
interruption caused the reload.
System image file is....
The gateway booted from this image location.