![background image](http://html.mh-extra.com/html/cisco/vgd-1t3/vgd-1t3_software-configuration-manual_65018131.webp)
Using Cisco Unified Communications Manager to Configure MGCP Gateway Support
Configuring MGCP Gateway Support
121
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Verifying MGCP Configuration on the Cisco VGD 1T3 Voice Gateway
The show commands described in this section can be used to verify the MGCP configuration.
Step 4
ip address
ip-address
subnetmask
Example:
Router(config-if)# ip address 10.10.2.23
255.255.255.255
Configures an IP address and subnet mask on the
router’s Ethernet interface.
Step 5
no shutdown
Example:
Router(config-if)# no shutdown
Activates the Ethernet port.
Step 6
exit
Example:
Router(config-if)# exit
Exits interface mode and enters global configuration
mode.
Step 7
hostname
name
Example:
Router(config)# hostname smith
Assigns a unique name to a network router which
enables Cisco Unified Communications Manager to
identify the device.
•
Default device name is Router.
Step 8
mgcp
Example:
Router(config)# mgcp
Enables the MGCP protocol.
Step 9
mgcp call-agent
{
ip-address
|
host-name
} [
port
]
[
service-type
type
] [
version
version-number
]
Example:
Router(config)# mgcp call-agent 10.0.0.21 mgcp 0.1
Specifies the primary Cisco Unified Communications
Manager server’s IP address or domain name, and the
port gateway service type and version number.
Step 10
mgcp dtmf-relay voip codec
{
all
|
low-bit-rate
}
mode
{
cisco
|
nse
|
out-of-band
}
Example:
Router(config)# mgcp dtmf-relay voip codec all mode
cisco
Selects the codec type and the dual tone
multifrequency (DTMF) relay services.
Step 11
ccm-manager mgcp
Example:
Router(config)# ccm-manager mgcp
Enables the MGCP gateway to support Cisco Unified
Communications Manager.
Step 12
exit
Example:
Router(config)# exit
Exits global configuration mode.
Command
Purpose