![background image](http://html.mh-extra.com/html/cisco/vgd-1t3/vgd-1t3_software-configuration-manual_65018169.webp)
Using Cisco Unified Communications Manager to Configure Transcoding and Media Termination Point
Configuration Examples for Transcoding and MTP
159
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
DSP-Farm Services on the Cisco VGD 1T3: Example
The following example shows a configuration of transcoding services on a PVDM2. DSP farm profile 6,
which supports transcoding, is assigned to Cisco Unified Communications Manager group 988.
Note
This configuration requires Cisco IOS Release 12.4(20)YA or later.
Current configuration : 2661 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname sjl23
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
!
ip host boating 223.255.254.254
no ftp-server write-enable
!
voice-card 1
no dspfarm
dsp services dspfarm
!
!
voice service voip
h323
!
!
!
interface FastEthernet0/0
ip address 10.4.20.7 255.255.255.0
no ip mroute-cache
speed auto
half-duplex
no cdp enable
!
interface FastEthernet0/1
no ip address
no ip mroute-cache
shutdown
duplex auto
speed auto
no cdp enable
!
ip default-gateway 10.4.0.1
ip classless
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
ip route 223.255.254.254 255.255.255.255 10.4.0.1
no ip http server
!
!