![background image](http://html.mh-extra.com/html/cisco/vgd-1t3/vgd-1t3_software-configuration-manual_65018179.webp)
Using Cisco Unified Communications Manager to Configure RSVP Agent
Enabling the RSVP Agent on the Voice Gateway
169
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Figure 1
RSVP Agent in Cisco Unified Communications Manager Meshed Network
To support video calls, MTP and transcoding resources can process multiple streams in a single session,
including audio, video and data, one-way or two-way, using a pass-through mode. In pass-through mode,
a SCCP device processes streams using a pure software MTP, regardless of the type of stream, so it can
be used for any stream type. Video and data streams are processed using pass-through mode. Audio
streams can be processed with or without pass-through mode.
Enabling the RSVP Agent on the Voice Gateway
This section contains the following procedures:
•
Enabling RSVP in a DSP Farm Profile, page 169
(required)
•
Verifying RSVP Agent Configuration, page 171
(optional)
•
Troubleshooting the RSVP Agent, page 172
(optional)
Enabling RSVP in a DSP Farm Profile
Perform this procedure to enable the RSVP agent on an MTP or transcoder device.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
dspfarm profile profile-identifier {mtp | transcode}
4.
codec pass-through
5.
maximum sessions number
or
maximum sessions {hardware | software} number
6.
associate application sccp
V
V
V
IP
IP
IP
IP
IP
RSVP agent
RSVP agent
IP phones
PC video
RSVP agent
Cisco Unified CallManager
127438
M