65
Configuring the Phone Screen Saver
You can enable your phone’s screen saver and specify its appearance and the amount of time
for the phone to be idle before it begins. Some of these options can be configured from your PC
using the IP Phone Web Interface.
To configure your screen saver:
STEP 1
Press the Setup button.
STEP 2
Scroll to Screen Saver Mode and press the select softkey.
To enable your screen saver:
STEP 1
In the Screen Saver Mode screen, choose Enable Screen Saver and press the edit
softkey.
STEP 2
Press the y/n softkey to choose yes.
STEP 3
Press the ok softkey.
STEP 4
Press the save softkey.
To specify the amount of time before the screen saver turns on if your phone is idle:
STEP 1
In the Screen Saver Mode screen, choose Screen Saver Wait Time and press the
edit softkey.
STEP 2
Enter the time, in minutes, to wait before the screen saver starts.
STEP 3
Press the ok softkey.
STEP 4
Press the save softkey.
Summary of Contents for SPA 303g
