Cisco SPA 303g User Manual Download Page 34

Page: 34 / 79

Placing or Answering a Call

NOTE

You may have to dial a number or numbers to reach an outside line. Ask your phone

administrator.

Basic techniques to answer a call:

•

Pick up the handset.

•

Press the Speaker button (Cisco SPA 303).

•

Press the Headset button (Cisco SPA 303).

•

Press a green line button to place a call or a red flashing line button to answer a call
(Cisco SPA 303).

•

Techniques to place a call without dialing a number (Cisco SPA 303):

•

Press the redial softkey, then the dial softkey to dial the last number.

•

If you have configured speed dials, press the assigned speed dial code and then
press the dial softkey.

•

To answer a call that is ringing on another phone in the phone system, press the pickup
softkey. Then enter the extension number of the ringing phone.

NOTE

You also can place a call by choosing a number from a directory or from the Call History.

See the

“Using the Phone Directories (Cisco SPA 303)” section

and the

“Using the Call

History Lists” section

Summary of Contents for SPA 303g
















































































Search results

Summary of Contents for SPA 303g

Reviews:

Related manuals for SPA 303g

Brands by name

Popular brands

Cisco SPA 303g, User Manual

Search results

Summary of Contents for SPA 303g

Reviews:

Related manuals for SPA 303g

Brands by name

Popular brands