19
Connecting the Handset
STEP 1
Turn the phone body over to expose the ports on the back of the unit.
STEP 2
Insert the long end of the phone cord into the handset port on the phone body
that is marked with a phone symbol. (labeled 5 in
Figure 3
).
STEP 3
(Optional) Route the phone cord through the cable slot (labeled 4 in
Figure 3
).
STEP 4
Insert the other end of the phone cord into the port at the bottom of the handset
(not shown).
Connecting the Power
Insert one end of the power cord into an outlet and insert the other end of the power cord into
the power port on the phone body (labeled 6 in
Figure 3
).
NOTE
To power the phone through the Ethernet connection, use the optional Cisco POES5 5-
Volt Power Over Ethernet Splitter accessory. See the Cisco POES5 documentation on
Cisco.com for more information.
Connecting Your Cisco SPA 303 to the Network
STEP 1
Insert one end of the Ethernet cable into the network port on the phone body
marked “SW” (labeled 3 in
Figure 3
).
STEP 2
Insert the other end of the Ethernet cable into the appropriate device, such as a
network switch, on your network.
Summary of Contents for SPA 303g
