Cisco SPA 303g User Manual Download Page 59

Page: 59 / 79

Creating Speed Dials on Unused Line Buttons

NOTE

This feature must be enabled by your phone administrator.

STEP 1

Press the unused line button and hold down for three seconds. The Define

Speed Dial window displays.

STEP 2

Enter the name for the speed dial.

STEP 3

Press the Down Arrow key to reach the phone number field. Enter the phone

number and press Save.

STEP 4

After creating the speed dial, it displays next to the line button and is marked with

a special icon. In the figure below, “Mary” is the configured speed dial.

STEP 5

Press the line button to use the speed dial.

Creating Numerical Speed Dials

STEP 1

Press the Setup button.

STEP 2

Scroll to Speed Dial and press the select softkey.

STEP 3

For a new speed dial, scroll to select an unused speed dial (marked with Not

Assigned). To edit a previously existing speed dial, select it.

STEP 4

Press the edit softkey.

STEP 5

Enter the number to assign to the speed dial and press the ok softkey

Summary of Contents for SPA 303g
















































































Search results

Summary of Contents for SPA 303g

Reviews:

Related manuals for SPA 303g

Brands by name

Popular brands

Cisco SPA 303g, User Manual

Search results

Summary of Contents for SPA 303g

Reviews:

Related manuals for SPA 303g

Brands by name

Popular brands