5-4
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-07
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Setup Command Parameters
lists the setup comment parameters.
Table 5-1
Setup Command Parameters
Parameter
Definition
IP address
IP address of the SCE 2000.
subnet mask
Subnet mask of the SCE 2000.
default gateway
Default gateway.
Hostname
Character string used to identify the SCE 2000. Maximum 20
characters.
admin password
Admin level password. Character string from 4-100 characters
beginning with an alpha character.
root password
Root level password. Character string from 4-100 characters
beginning with an alpha character.
password encryption status
Enable or disable password encryption?
Time Settings
time zone name and offset
Standard time zone abbreviation and minutes offset from UTC.
local time and date
Current local time and date. Use the format: 00:00:00 1 January
2002
SNTP Configuration
broadcast client status
Set the status of the SNTP broadcast client. If enabled, the SCE will
synchronize its local time with updates received from SNTP
broadcast servers.
unicast query interval
Interval in seconds between unicast requests for update (64 – 1024)
unicast server IP address
IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status
Enable or disable IP DNS-based hostname translation.
default domain name
Default domain name to be used for completing unqualified host
names
IP address
IP address of domain name server. (maximum of 3 servers)
RDR Formatter Destination Configuration
IP address
IP address of the RDR-formatter destination
TCP port number
TCP port number of the RDR-formatter destination
Access Control Lists
