5-18
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-07
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Step 15
Configure the SCE enterprise trap status.
•
To disable the SCE enterprise traps, type
n
and
press
Enter
.
•
To enable the SCE enterprise traps, type
y and
press
Enter
.
Enable the SCE enterprise traps []:
Step 16
Type the name of the system administrator and press
Enter
.
Note that there is no default for this parameter.
Enter system administrator contact name []:
EXAMPLE:
Following is a sample SNMP configuration, configuring one trap manager, one GET community, and
one SET community, and enabling the authentication failure trap, as well as all enterprise traps.
Would you like to enter the SNMP configuration menu? [no]:
y
Enable SNMP management? [no]:
y
Enter SNMP GET community name[]:
public
Enter Access list number allowing access with this community string, use ‘0’ to allow all:
0
Would you like to add another SNMP GET community? [no]:
Enter SNMP SET community name[]:
private
Enter Access list number allowing access with this community string, use ‘0’ to allow all:
2
Would you like to add another SNMP SET community? [no]:
Would you like to configure SNMP trap managers? [no]:
y
Enter SNMP trap manager IP address:
10.1.1.253
Enter SNMP trap manager community string:
public
Enter trap manager SNMP version:
2c
Would you like to add another SNMP trap manager? [no]:
Enable the ‘Authentication Failure’ trap [no]:
y
Enable SCE enterprise traps []:
y
Enter system administrator contact name []:
John Smith
Step 9: How to Configure the Topology-Dependent Parameters
The topology configuration menu is a series of guided questions relating to the deployment of the SCE
2000
in the network and its mode of operation. Values for the parameters are configured based on the
user answers.
The correct value for each parameter must be ascertained before configuring the system to make sure
that the system will function in the desired manner. (See
Information About Topology, page 3-1
for a
comprehensive discussion of topology and the related parameters.)
Note
Values may not be requested for all topology-dependent parameters, as certain parameters do not apply
to all topologies.
