5-17
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-07
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Step 7
Assign an access list to restrict the SNMP management stations that may use this SET community.
Type a number (1 through 99) or type “0” to permit access to all IP addresses, and press
Enter
.
Enter Access list number allowing access with this community string, use ‘0’ to allow all:
Step 8
The maximum number of SET communities is 20.
•
To add more entries, type
y and
press
Enter.
Would you like to add another SNMP SET community? [no]: y
•
Enter up to 20 SNMP SET communities as described.
•
When all entries have been added, press
Enter.
Would you like to add another SNMP SET community? [no]:
Step 9
Enter the SNMP trap managers menu.
Would you like to configure SNMP trap managers? [no]:
y
Type
y and
press
Enter
.
The SNMP trap managers dialog begins.
If you choose not to configure SNMP trap managers, the dialog skips to the authentication failure trap
status.
Step 10
Type the trap manager IP address and press
Enter
.
Enter SNMP trap manager IP address:
Note that there is no default for this parameter.
Step 11
Type the trap manager community string and press
Enter
.
Note that there is no default for this parameter.
Enter SNMP trap manager community string:
Step 12
Type the number of the trap manager SNMP version (1 or 2c) and press
Enter
.
Note that there is no default for this parameter.
Enter trap manager SNMP version:
Step 13
The maximum number of trap managers is 20.
•
To add more entries, type
y and
press Enter.
Would you like to add another SNMP trap manager? [no]: y
•
Enter up to 20 trap managers as described.
•
When all entries have been added, press
Enter
.
Would you like to add another SNMP trap manager? [no]:
Step 14
Configure the Authentication Failure trap status.
•
To disable the Authentication Failure trap, press
Enter
.
•
To enable the Authentication Failure trap, type
y and
press
Enter
.
Enable the ‘Authentication Failure’ trap [no]: