VPN
Site-to-Site IPsec VPN
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
110
6
STEP 3
Click
Save.
Configuring the Spoke Site
When configuring the spoke site, you will create a VPN policy for each spoke site,
for example, VPN policy Spoke1ToHub for spoke site1 and Spoke2ToHub for spoke
site2. To configure the spoke site enter the following information:
STEP 1
On the
Advanced VPN Setup
page, in the
VPN Policy Table
, click Add Row.
To configure the VPN settings for each spoke site, configure the following features:
Remote Endpoint
Select
IP Address
from the drop-down list and
enter the IP address.
Redundant Enable
Leave unchecked.
NetBIOS
Leave unchecked.
Local Traffic Section >
Local IP
Select
Subnet
from the drop-down list.
IP Address
Enter the local LAN subnet, for example,
192.168.1.0 and 192.168.74.0 for HubToSpoke1 or
192.168.1.0 and 192.168.75.0 for HubToSpoke2.
Subnet Netmask
Enter
255.255.255.0,
then click Add to enter the
address in the
IP/Subnet List
.
Remote Traffic Section
>Remote IP
Select Subnet from the drop-down list.
IP Address
Enter remote LAN subnet, for example
192.168.75.0
for HubToSpoke1 or
192.168.74.0
for HubToSpoke2.
Subnet Netmask
Enter
255.255.255.0,
then click Add to enter the
address in the
IP/Subnet List.
Add/Edit VPN Policy
Configuration > Policy
Name
Enter
Spoke1ToHub
or
Spoke2toHub
.
Policy Type
Select
Auto Policy
from the drop-down list.
VPN Failover
Leave unchecked.
