Networking
Configuring LAN Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
35
3
When Internet Connection Type is Static IP:
In the
Static IP
Settings section, enter the following information
:
In the
IPv6 Settings
section, enter the following information:
For IPv6
Size
Enter the size of bytes. (Range 576 - 1500, Default
1500).
MAC Address Clone
Sometimes, you may need to set the MAC address of
the device WAN port to be identical to your PC or
some other MAC address. This is called MAC address
cloning.
For example, some ISPs register your computer card
MAC address when the service is first installed. When
you place a router behind the cable modem or DSL
modem, the MAC address from the device WAN port is
not recognized by the ISP.
In this case, to configure your device to be recognized
by the ISP, you can clone the MAC address of the WAN
port to be the same as your computer MAC address.
To configure a MAC address clone select Enable.
MAC Address
To set the MAC address of the device WAN port, do
one of the following:
To set the MAC address of the WAN port to your PC
MAC address, click
Clone My PC’s MAC
.
To specify a different MAC address, enter it in the
MAC
Address
field.
Internet IP Address
IP address of the WAN port.
Subnet mask
Subnet mask of the WAN port.
Default Gateway
IP address of the default gateway.
Static DNS1 & 2
Enter the IP address of the primary and or
secondary Static DNS in the fields (Hint 1.2.3.4).
Mode
IPv6
