manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 590 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 590

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-8

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring FC-SP and DHCHAP

DHCHAP

About Password Configuration for Remote Devices

You can configure passwords in the local authentication database for other devices in a fabric. The other 
devices are identified by their device name, which is also known as the switch WWN or device WWN. 
The password is restricted to 64 characters and can be specified in clear text (0) or in encrypted text (7).

Note

The switch WWN identifies the physical switch. This WWN is used to authenticate the switch and is 
different from the VSAN node WWN.

Configuring DHCHAP Passwords for Remote Devices

To locally configure the remote DHCHAP password for another switch in the fabric, perform this task: 

The following example configures a clear text password for another switch in the fabric that is identified 
by the switch WWN device name:

switch(config)# 

fcsp dhchap devicename 00:11:55:66:00:aa:bb:cc password 0 NewPassword 

The following example configures a password entered in an encrypted format for another switch in the 
fabric that is identified by the switch WWN device name:

switch(config)# 

fcsp dhchap devicename 00:11:22:33:55:aa:bb:cc password 7 asdflkjh

About the DHCHAP Timeout Value 

During the DHCHAP protocol exchange, if the Cisco Nexus 5000 Series switch does not receive the 
expected DHCHAP message within a specified time interval, authentication failure is assumed. The time 
ranges from 20 (no authentication is performed) to 1000 seconds. The default is 30 seconds.

When changing the timeout value, consider the following factors:

•

The existing RADIUS and timeout values.

•

The same value must also be configured on all switches in the fabric.

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

fcsp dhchap devicename 

switch-wwn

 password 

password

Configures a password for another switch in the 
fabric that is identified by the switch WWN 
device name.

switch(config)# 

no

 

fcsp dhchap devicename 

switch-wwn

 password 

password

Removes the password entry for this switch from 
the local authentication database.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments