manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 355 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 355

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-15

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Smart Call Home

Verifying Call Home Configuration

Verifying Call Home Configuration

To display Call Home configuration information, perform one of the following tasks:

Call Home Example Configuration 

The following example uses CFS to create a destination profile called Noc101, associate the Cisco-TAC 
alert group to that profile, and configure contact and e-mail information to all CFS-enabled devices.

configure terminal

snmp-server contact [email protected] 

callhome

email-contact [email protected]

phone-c1-800-123-4567

street-address 123 Anystreet st. Anytown,AnyWhere 

destination-profile Noc101 full-text

destination-profile full-text-destination email-addr [email protected]

destination-profile full-text-destination message-level 5 

destination-profile Noc101 alert-group Configuration

alert-group Configuration user-def-cmd “show ip routing”

transport email smtp-server 192.0.2.10 use-vrf Red

enable

commit

Default Settings

Table 1-3

 lists the default settings for Call Home parameters.

Command

Purpose

show callhome 

Displays the status for Call Home.

show callhome destination-profile

 name

Displays one or more Call Home destination 
profiles.

show callhome diagnostic signature

Displays the attributes and statistics of a 
call-home diagnostic signature file.

show callhome smart-licensing

Displays the call home smart licensing 
information.

show callhome transport-email

Displays the e-mail configuration for Call Home.

show callhome user-def-cmds

Displays CLI commands added to any alert 
groups.

show running-config 

[

callhome 

| 

callhome-all

]

show startup-config callhome

Displays the running configuration for Call 
Home.

show startup-config callhome

Displays the startup configuration for Call Home.

show tech-support callhome

Displays the technical support output for Call 
Home.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments