manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 283 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 283

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-9

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring ACLs

Configuring MAC ACLs

Verifying IP ACL Configurations

To display IP ACL configuration information, perform one of the following tasks:

For detailed information about the fields in the output from these commands, refer to the 

Cisco Nexus 

5000 Series Command Reference

.

Displaying and Clearing IP ACL Statistics

Use the 

show ip access-lists 

command to display statistics about an IP ACL, including the number of 

packets that have matched each rule. For detailed information about the fields in the output from this 
command, refer to the 

Cisco Nexus 5000 Series Command Reference

.

Note

The mac access-list is applicable to non-IPv4 and non-IPv6 traffic only.

To display or clear VACL statistics, perform one of the following tasks:

For detailed information about these commands, refer to the 

Cisco Nexus 5000 Series Command 

Reference

.

Configuring MAC ACLs

This section includes the following topics:

•

Creating a MAC ACL, page 1-10

•

Changing a MAC ACL, page 1-10

Command

Purpose

show running-config 

Displays ACL configuration, including IP ACL 
configuration and interfaces that IP ACLs are 
applied to.

show ip access-lists

Displays the IP ACL configuration.

show running-config interface

Displays the configuration of an interface to 
which you have applied an ACL.

Command

Purpose

show ip access-lists

Displays IP ACL configuration. If the IP ACL 
includes the 

statistics

 command, then the 

show ip 

access-lists

 command output includes the number 

of packets that have matched each rule.

clear ip access-list counters

Clears statistics for all IP ACLs or for a specific 
IP ACL.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments