manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 516 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 516

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-16

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring and Managing Zones

Zone Set Duplication

Caution

Copying an active zone set to a full zone set may overwrite a zone with the same name if it already exists 
in the full zone set database.

This section includes the following topics:

•

Copying Zone Sets, page 1-16

•

Renaming Zones, Zone Sets, and Aliases, page 1-16

•

Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups, page 1-17

•

Clearing the Zone Server Database, page 1-17

Copying Zone Sets

On Cisco Nexus 5000 Series switches, you cannot edit an active zone set. However, you can copy an 
active zone set to create a new zone set that you can edit.

To make a copy of a zone set, perform this task:

Renaming Zones, Zone Sets, and Aliases

To rename a zone, zone set, fcalias, or zone-attribute-group, perform this task:

Command

Purpose

Step 1

switch#

 zone copy active-zoneset full-zoneset 

vsan 

vsan-id 

Please enter yes to proceed.(y/n) [n]? 

y

Makes a copy of the active zone set in the 
specified VSAN to the full zone set.

switch# 

zone copy vsan 

vsan-id

 active-zoneset 

scp://guest@myserver/tmp/active_zoneset.txt

Copies the active zone in the specified VSAN 
to a remote location using SCP.

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)#

 zoneset rename 

oldname newname

 

vsan 

vsan-id

Renames a zone set in the specified 
VSAN.

switch(config)#

 zone rename 

oldname newname

 vsan 

vsan-id

Renames a zone in the specified VSAN.

switch(config)# 

fcalias rename 

oldname newname

 

vsan 

vsan-id

Renames a fcalias in the specified VSAN.

switch(config)#

 zone-attribute-group rename 

oldname newname

 vsan 

vsan-id

Renames a zone attribute group in the 
specified VSAN.

Step 3

switch(config)#

 zoneset activate name 

newname

 

vsan 

vsan-id

Activates the zone set and updates the new 
zone name in the active zone set.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments