manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 375 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 375

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-11

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring SNMP

Configuring SNMP

Disabling Up/ Down Notifications on an Interface

You can disable linkUp and linkDown notifications on an individual interface. You can use this limit 
notifications on flapping interface (an interface that transitions between up and down repeatedly). 

To disable linkUp/linkDown notifications for the interface in interface configuration mode, perform this 
task:

Enabling One-Time Authentication for SNMP over TCP

You can enable a one-time authentication for SNMP over a TCP session.

To enable one-time authentication for SNMP over TCP in global configuration mode, perform this task:

Command

Purpose

switch(config)# 

snmp-server enable traps 

link

 [

cisco

] [

ietf

 | 

ietf-extended

] 

Enables the link SNMP notifications.

Command

Purpose

switch(config-if)# 

no snmp trap link-status 

Disables SNMP link-state traps for the interface. 
Enabled by default.

Command

Purpose

switch(config)# 

snmp-server tcp-session 

[auth]

Enables a one-time authentication for SNMP over 
a TCP session. Default is disabled.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments