manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 527 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 527

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-3

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Distributing Device Alias Services

Device Alias Databases

Device Alias Databases

The device alias feature uses two databases to accept and implement device alias configurations.

•

Effective database—The database currently used by the fabric.

•

Pending database—Your subsequent device alias configuration changes are stored in the pending 
database.

If you modify the device alias configuration, you need to commit or discard the changes as the fabric 
remains locked during this period.

Device alias database changes are validated with the applications. If any of the applications cannot 
accept the device alias database changes, then those changes are rejected; this applies to device alias 
database changes resulting from either a commit or merge operation.

This section includes the following topics:

•

Creating Device Aliases, page 1-3

•

Device Alias Modes, page 1-4

•

Changing Device Alias Mode Guidelines, page 1-4

•

Configuring Device Alias Modes, page 1-5

•

About Device Alias Distribution, page 1-5

•

Locking the Fabric, page 1-6

•

Committing Changes, page 1-6

•

Discarding Changes, page 1-6

•

Fabric Lock Override, page 1-7

•

Disabling and Enabling Device Alias Distribution, page 1-7

Creating Device Aliases

To a create a device alias in the pending database, perform this task:

Command

Purpose

Step 1

switch# 

configuration terminal 

switch(config)# 

Enters configuration mode.

Step 2

switch(config)# 

device-alias database

switch(config-device-alias-db)#

Enters the pending database configuration 
submode.

Step 3

switch(config-device-alias-db)#

 device-alias 

name 

device-name

 pwwn 

pwwn-id

Specifies a device name for the device that is 
identified by its pWWN. Starts writing to the 
pending database and simultaneously locks 
the fabric as this is the first-issued device alias 
configuration command.

switch(config-device-alias-db)#

 no device-alias 

name 

device-name

 

Removes the device name for the device that 
is identified by its pWWN.

switch(config-device-alias-db)#

 device-alias 

rename 

old-device-name

 

new-device-name

 

Renames an existing device alias with a new 
name.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments