Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 322 / 660

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
1-2
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Session Manager
Configuring Session Manager
Configuring Session Manager
This section includes the following topics:
•
Creating a Session, page 1-2
• Configuring ACLs in a Session, page 1-2
•
Verifying a Session, page 1-3
• Committing a Session, page 1-3
•
Saving a Session, page 1-3
• Discarding a Session, page 1-3
•
Session Manager Example Configuration, page 1-3
Creating a Session
You can create up to 32 configuration sessions.
Configuring ACLs in a Session
You can configure ACLs within a configuration session.
Command Purpose
Step 1
switch# configure session name
Creates a configuration session and enters session
configuration mode. The name can be any alphanumeric
string.
Step 2
switch(config-s)#
show configuration
session [ name ]
(Optional) Displays the contents of the session.
Step 3
switch(config-s)# save location
(Optional) Saves the session to a file. The location can be
in bootflash or volatile.
Command Purpose
Step 1
switch# configure session name
Creates a configuration session and enters session
configuration mode. The name can be any alphanumeric
string.
Step 2
switch(config-s)# ip access-list name
Creates an ACL.
Step 3
switch(config-s-acl)# permit protocol
source destination
(Optional) Adds a permit statement to the ACL.
Step 4
switch(config-s-acl)# interface
interface-type number
Enters interface configuration mode.
Step 5
switch(config-s-if)# ip port
access-group name in
Adds a port access group to the interface.
Step 6
switch# show configuration session
[ name ]
(Optional) Displays the contents of the session.