manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 629 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 629

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-3

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Port Tracking

Configuring Port Tracking

•

Tracking Multiple Ports, page 1-5

•

About Monitoring Ports in a VSAN, page 1-5

•

Monitoring Ports in a VSAN, page 1-5

•

About Forceful Shutdown, page 1-6

•

Forcefully Shutting Down a Tracked Port, page 1-6

Enabling Port Tracking

The port tracking feature is disabled by default in Cisco Nexus 5000 Series switches. When you enable 
this feature, port tracking is globally enabled for the entire switch. 

To configure port tracking, enable the port tracking feature and configure the linked ports for the tracked 
port.

To enable port tracking, perform this task:

About Configuring Linked Ports 

You can link ports using one of two methods: 

•

Operationally binding the linked ports to the tracked port (default).

•

Continuing to keep the linked port down forcefully, even if the tracked port has recovered from the 
link failure.

Operationally Binding a Tracked Port

When you configure the first tracked port, operational binding is automatically in effect. When you use 
this method, you have the option to monitor multiple ports or monitor ports in one VSAN.

To operationally bind a tracked port, perform this task:

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

port-track enable

Enables port tracking. 

switch(config)# 

no port-track enable

Removes the currently applied port tracking configuration 
and disables port tracking. 

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

interface fc 

slot

/

port

Enters the interface configuration mode for the linked port. You 
can now configure the tracked ports.

Note

This link symbolizes the direct link (1) in 

Figure 1-1

.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments