manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 343 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 343

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-3

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Smart Call Home

Information About Call Home

destination profile only if that Call Home alert belongs to one of the alert groups associated with that 
destination profile and if the alert has a Call Home message severity at or above the message severity set 
in the destination profile (see the 

“Call Home Message Levels” section on page 1-5

).

Table 1-1

 lists supported alert groups and the default CLI command output included in Call Home 

messages generated for the alert group.

Table 1-1

Alert Groups and Executed Commands

Alert Group

Description

Executed Commands

Cisco-TAC

All critical alerts from the other alert groups 
destined for Smart Call Home.

Execute commands based on the 
alert group that originates the alert.

Configuration

Periodic events related to configuration.

show module
show module fex
show running-config all
show startup-config
show version

Diagnostic

Events generated by diagnostics.

show diagnostic result fex all
show diagnostic result module all
show diagnostic result module 

number

show logging last 

number

show module
show module fex
show prom all
show tech-support platform
show tech-support platform 
callhome
show tech-support platform 
callhome fex
show version

EEM

Events generated by EEM.

show diagnostic result module all
show diagnostic result module 

number

show module
show tech-support platform

Environmental

Events related to power, fan, and 
environment-sensing elements such as 
temperature alarms.

show environment
show environment fan
show environment fex all
show environment power
show environment temperature
show logging last 1000
show module
show tech-support platform 
callhome
show version

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments