manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 347 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 347

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-7

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Smart Call Home

Configuring Call Home

•

Creating a Destination Profile, page 1-9

•

Modifying a Destination Profile, page 1-9

•

Associating an Alert Group with a Destination Profile, page 1-10

•

Adding show Commands to an Alert Group, page 1-11

•

Configuring E-Mail, page 1-12

•

Configuring Periodic Inventory Notification, page 1-13

•

Disabling Duplicate Message Throttle, page 1-13

•

Enabling or Disabling Call Home, page 1-14

•

Testing Call Home Communications, page 1-14

Guidelines for Configuring Call Home 

To configure Call Home, perform this task:

Step 1

Assign contact information.

Step 2

Configure destination profiles.

Step 3

Associate one or more alert groups to each profile. 

Step 4

(Optional) Add additional 

show

 commands to the alert groups.

Step 5

Configure transport options.

Step 6

Enable Call Home.

Step 7

(Optional) Test Call Home messages.

Configuring Contact Information

You must configure the e-mail, phone, and street address information for Call Home. You can optionally 
configure the contract ID, customer ID, site ID, and switch priority information.

To configure contact information, perform this task: 

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

snmp-server contact 

sys-contact

Configures the SNMP sysContact.

Step 3

switch(config)# 

callhome

Enters callhome configuration mode.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments