2-17
Cisco NAC Appliance Hardware Installation Guide
OL-20326-01
Chapter 2 Preparing for Installation
Rack-Mounting Your Cisco NAC Appliance CAM/CAS
Figure 2-4
Installing the Slide Rail into the Rack
Step 4
If you need to adjust the slide-rail length, lift the release tab (see
Figure 2-5
) and fully extend the
rail-adjustment bracket from the rear of the slide rail until it snaps into place.
Step 5
Align the pins on the rear rail-locking carrier with the holes on the rear mounting flange. Then, press the
tab (see
Figure 2-5
) to secure the rear of the slide rail to the rear mounting flange.
Note
Ensure that the pins are fully extended through the mounting flange and slide rail.
1
Adjustment tab 1
3
Rail-adjustment bracket
2
Adjustment tab 2
