Cisco MWR 1941-DC - 1941 Mobile Wireless Router, Software Configuration Manual

Page: 90 / 184

5-10
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
OL-11503-01
Chapter 5 Cisco MWR 1941-DC Router IP-RAN Command Reference
mode y-cable
mode y-cable
To access the command mode that allows you to manually control the relays on the VWIC card, use the
mode y-cable command.
mode y-cable
Syntax Description This command has no parameters, it invokes the y-cable mode.
Defaults There are no default settings or behaviors.
Command Modes Redundancy configuration
Command History
Examples The following example enables y-cable mode.
mode y-cable
Related Commands
Release Modification
12.2(8)MC2 This command was introduced.
12.2(15)MC1 This command was incorporated in Cisco IOS 12.2(15)MC1.
12.3(11)T This command was incorporated in Cisco IOS 12.3(11)T.
Command Description
standalone Indicates whether the MWR 1941-DC router is being used as a
standalone device and manually sets the relays.
standby use-interface Designates a loopback interface as a health or revertive interface.
redundancy Invokes redundancy mode.