Cisco MWR 1941-DC - 1941 Mobile Wireless Router, Software Configuration Manual

Page: 7 / 184

Contents
vii
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
OL-11503-01
Configuring the Card Type and Controller for a T3 Interface
6-17
Configuring DSU Mode and Bandwidth for T3
6-19
Configuring the E3 Interface
6-19
Configuring the Card Type and Controller for an E3 Interface
6-20
Configuring DSU Mode and Bandwidth for E3
6-21
Configuring Scrambling for E3
6-22
Configuration Examples
6-22
Configuring the NM-AIC-64, Contact Closure Network Module
6-23
Serial Communication Channels
6-24
Serial Data Channel
6-24
Asynchronous Craft Port
6-25
Configuring the AIC
6-25
Configuration Tasks
6-26
Configuring the AIC
6-26
Accessing the AIC
6-29
Configuring the NOC IP Address
6-30
Configuring Alarms
6-30
Programming the Analog Contact Points
6-31
Programming the Discrete Contact Points
6-32
Verifying the IP Address
6-33
Troubleshooting Tips
6-35
Monitoring and Maintaining the NM-AIC-64 Contact Closure Network Module
6-35
Software Upgrade
6-35
Configuration Backup
6-35
Override
6-36
Configuration Examples
6-36
Configuring QoS Attributes
6-43
Creating a Class Map
6-43
Creating a Policy Map
6-44
Assigning a QoS Boilerplate to an Interface
6-45
Configuration Example
6-45
Filtering IP Packets Using Access Lists
6-46
Creating Standard and Extended Access Lists Using Numbers
6-46
Creating Standard and Extended Access Lists Using Names
6-50
Specifying IP Extended Access Lists with Fragment Control
6-53