2-23
Cisco LRE CPE Hardware Installation Guide
78-11469-04
Chapter 2 Installation
Connecting to a Wall-Mounted Telephone Jack
Connecting to a Wall-Mounted Telephone Jack
The CPE connects to a Catalyst LRE switch through the telephone wiring of a
building. Follow these steps to connect the CPE to an LRE switch:
Step 1
Connect one end of a telephone cord (not included) to the WALL port of the CPE.
(See
Figure 2-9
.)
Caution
To reduce the risk of fire, use only number 26 American Wire Gauge (AWG) or
larger telephone cable.
Caution
Always disconnect all telephone lines from the wall outlet before servicing or
disassembling this equipment.
Figure 2-9
Connecting to a WALL port
Note
We recommend using a telephone cable that has a three-pair, rollover
configuration.
Step 2
Connect the other end of the telephone cord to the wall telephone jack.
65646
WA
N
AC
TIV
IT
Y
ET
HE
RN
ET
PO
WE
R
Cis
co
57
5-
LR
E
PWR
ENET
WALL PHONE
