Chapter 2 Installation
Installing the CPE
2-14
Cisco LRE CPE Hardware Installation Guide
78-11469-04
Step 6
(Optional) If you wish to attach the cable lock after the cables are installed, drill
another 1/2-inch (12.7-millimeters) hole in the cable lock hole. For more
information, see the
“Attaching the Cable Lock” section on page 2-29
.
Step 7
Insert two screws in the slots on the screw template, and tighten until they touch
the top of the screw template.
Step 8
Remove the screw template from the desk top.
Step 9
Slide the CPE onto the mounting screws until it locks in place. (See
Figure 2-2
.)
Figure 2-2
Mounting the CPE On Top of a Desk
Note
Figure 2-2
shows a Cisco 575 LRE CPE being mounted on top of a desk. Follow
the same procedure to mount a Cisco 576 LRE 997 or Cisco 585 LRE CPE on top
of a desk.
Note
The Cisco 575 LRE CPE, Cisco 576 LRE 997 CPE, and the Cisco 585 LRE CPE
use the same screw template and mounting screws. One CPE model can be
replaced with another, and the same mounting screws can be used.
Desktop
Wall
65644
at least
1/2 in.
(12.7 mm)
15˚
WAC
ACTIV
ITY ET
H
ERNE
T POW
ER
C
isco 5
75
-LRE
CPE
Screws
mounted
to desk
Slides on
this way
