Chapter 2 Installation
Verifying Package Contents
2-10
Cisco LRE CPE Hardware Installation Guide
78-11469-04
•
Do not open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
•
If one of the following situations arises, get the equipment checked by a
service personnel:
–
The power cord or plug is damaged.
–
Liquid has entered the equipment.
–
The equipment has been exposed to moisture.
–
The equipment does not work well, or you cannot get it to work
according to user’s manual.
–
The equipment has been dropped or damaged.
–
The equipment has obvious signs of breakage.
•
Do not leave this equipment in an unconditioned environment. Temperatures
above 45°C (113°F) can damage the equipment.
•
The sound pressure level at the operator’s position, according to IEC 704-1:
1982, is equal or less than 70 dB (A).
•
Keep this hardware installation guide for later reference.
Verifying Package Contents
When you unpack the CPE, be sure that the package contains the items in this list.
If any items are missing, notify your authorized Cisco sales representative.
•
Cisco 575 LRE, 576 LRE 997, or 585 LRE CPE
•
AC power adapter and power cord
•
Mounting kit containing these items:
–
Four rubber feet for installing the CPE on a desktop
–
Cable lock for securing cables to the CPE
–
Three number-8 Phillips pan-head screws for mounting the CPE under a
desk or on a wall and attaching cable lock to the CPE
–
Screw template for aligning screws
