Chapter 2 Installation
Installing the CPE
2-20
Cisco LRE CPE Hardware Installation Guide
78-11469-04
Step 6
(Optional) If you wish to attach the cable lock after the cables are installed, drill
a 1/2-inch (12.7-millimeters) hole in the screw template hole. For more
information, see the
“Attaching the Cable Lock” section on page 2-29
.
Step 7
Insert two screws in the slots on the screw template, and tighten until they touch
the top of the screw template.
Step 8
Remove the screw template from the wall.
Step 9
Slide the CPE onto the screws until it locks in place. (See Figure 2-6.)
Figure 2-6
Installing the CPE On a Wall
Note
Figure 2-6
shows a Cisco 575 LRE CPE being mounted on a wall. Follow the
same procedure to mount a Cisco 576 LRE 997 CPE or Cisco 585 LRE CPE on a
wall.
WA
N
AC
TIV
IT
Y
ET
HE
RN
ET
PO
WE
R
Cis
co
575
LR
E
Screw
Screw
CPE slides on
this way
CPE
53023
15˚
