Cisco Linksys BEFVP41 v2 User Manual Download | Manualshive

Page: 81 / 83

background image

75

Appendix K: Regulatory Information

EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch

EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment.

Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow.

Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent
isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not
allowed for use within the European community and countries that have adopted the European R&TTE directive
1999/5/EC.

For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance.

Linksys vakuuttaa täten että Wireless-G ADSL Gateway tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen.

Linksys Group déclare la Passerelle ADSL sans fil-G est conforme aux conditions essentielles et aux dispositions
relatives à la directive 1999/5/EC.

Belgique:

Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun
enregistrement n'est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un
enregistrement auprès de l'IBPT est requise. Pour une utilisation publique à l'extérieur de bâtiments, une licence
de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT.

France:

2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respectivement) sont complétement
libres d'utilisation en France (en utilisation intérieur). Pour ce qui est des autres canaux, ils peuvent être soumis
à autorisation selon le départment. L'utilisation en extérieur est soumis à autorisation préalable et très restreint.

Vous pouvez contacter l'Autorité de Régulation des Télécommunications (http://www.art-telecom.fr) pour de plus
amples renseignements.

FCC PART 68 STATEMENT

This equipment complies with Part 68 of the FCC Rules. A label is attached to the equipment that contains,
among other information, its FCC registration number and ringer equivalence number. If requested, this
information must be provided to the telephone company.

This equipment uses the following USOC Jack: RJ-11.

«
...
79
80
81
82
83
»

Summary of Contents for Linksys BEFVP41 v2




















































































Reviews:

No comments

Related manuals for Linksys BEFVP41 v2

Brand: Planet Pages: 20

Brand: Idis Pages: 31

Brand: Patton electronics Pages: 65

Brand: ZyXEL Communications Pages: 2

Brand: Dahua Pages: 24

Brand: Cowfish Technologies Pages: 38

Brand: TP-Link Pages: 87

iMarc SLV 9820-2M

Brand: Paradyne Pages: 24

Brand: Avigilon Pages: 12

Brand: Ciara Pages: 14

Brand: Lanpro Pages: 6

Brand: Proxim Pages: 65

Temporary Target Board M38517T-ADS

Brand: Renesas Pages: 14

Brand: Billion Pages: 168

Brand: D-Link Pages: 60

Brand: Cisco Pages: 60

Catalyst 2900 Series XL

Brand: Cisco Pages: 138

Brand: Cisco Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands