Cisco Linksys BEFVP41 v2 User Manual Download Page 16

Page: 16 / 83

Chapter 4: Connecting the Router
Connection Instructions

EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch

Connection Instructions

1. Before you begin, make sure that all of your hardware is powered off, including the Router, PCs, hubs,

switches, and cable or DSL modem.

2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router.

Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, hub, or switch.

Repeat this step to connect more PCs or other network devices to the Router.

3. Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port.

4. Power on the cable or DSL modem.

5. Connect the included power adapter to the Router’s Power port, and then plug the power adapter into an

electrical outlet.

The Power LED on the front panel will light up as soon as the power adapter is connected properly.

Proceed to “Chapter 5: Configuring the Router.”

Figure 4-2: Connect a PC

Figure 4-3: Connect the Internet

Figure 4-4: Connect the Power

Summary of Contents for Linksys BEFVP41 v2




















































































Search results

Summary of Contents for Linksys BEFVP41 v2

Reviews:

Related manuals for Linksys BEFVP41 v2

Brands by name

Popular brands

Cisco Linksys BEFVP41 v2, User Manual

Search results

Summary of Contents for Linksys BEFVP41 v2

Reviews:

Related manuals for Linksys BEFVP41 v2

Brands by name

Popular brands