Cisco Linksys BEFVP41 v2 User Manual Download | Manualshive

Page: 30 / 83

background image

24

Chapter 6: Using The Router’s Web-based Utility
The Setup tab

EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch

Network Setup

Router IP

The values for the Router’s Local IP Address and Subnet Mask are shown here. In most cases, keeping the
default values will work.

Local IP Address

. The default value is

192.168.1.1

.

Subnet Mask

. The default value is

255.255.255.0

.

Network Address Server Settings (DHCP)

A Dynamic Host Configuration Protocol (DHCP) server automatically assigns an IP address to each PC on your
network for you. Unless you already have one, it is highly recommended that you leave the Router enabled as
a DHCP server.

Local DHCP Server

. DHCP is already enabled by factory default. If you already have a DHCP server on your

network, set the Router’s DHCP option to

Disable

. If you disable DHCP, remember to assign a static IP

address to the Router.

Start IP Address

. Enter a value for the DHCP server to start with when issuing IP addresses. This value must

be 192.168.1. 2 or greater, because the default IP address for the Router is 192.168.1.1.

Number of Address (Optional)

. Enter the maximum number of PCs that you want the DHCP server to assign

IP addresses to. This number cannot be greater than 253. In order to determine the DHCP IP Address range,
add the starting IP address (e.g., 100) to the number of DHCP users. By default, add 100 to 50, and the range
is 192.168.1.100 to 192.168.1.149.

DHCP Address Range

. The range of DHCP addresses is displayed here.

Client Lease Time

. The Client Lease Time is the amount of time a network user will be allowed connection to

the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be
“leased” this dynamic IP address.

Time Setting

For an accurate keeping in the Router’s logs and functions, select your local time zone from the drop-down
menu.

When finished making your changes on this screen, click the

Save Settings

button to save these changes, or

click the

Cancel Changes

button to undo your changes.

Figure 6-10: Network Setup

Dynamic IP address

: a temporary IP

address assigned by a DHCP server

«
...
28
29
30
31
32
...
»

Summary of Contents for Linksys BEFVP41 v2




















































































Reviews:

No comments

Related manuals for Linksys BEFVP41 v2

Brand: 4RF Pages: 7

Brand: Quick Eagle Networks Pages: 4

Brand: LaCie Pages: 22

Brand: dixell Pages: 4

Barricade SMC7901WBRA2

Brand: SMC Networks Pages: 2

Brand: 8level Pages: 52

IPLink 2603 Series

Brand: Patton Pages: 120

B-Control Fader BCF2000

Brand: Behringer Pages: 13

Network Scanning Unit A

Brand: Ricoh Pages: 206

Brand: ALIBI Pages: 232

ipRocketLink 3101 Series

Brand: Patton Pages: 119

Brand: Acces Pages: 21

Brand: Hame Pages: 37

Brand: Quantum Pages: 108

Odin CL-4 Connect

Brand: DAPAudio Pages: 20

Brand: Allied Telesis Pages: 136

Brand: Hornington Pages: 8

Brand: ORANGE Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands