manualshive.com logo in svg

Cisco Linksys BEFVP41 v2, User Manual, Page: 61 / 83

Share
Download
Cisco Linksys BEFVP41 v2 User Manual Download Page 61

55

Appendix A: Troubleshooting
Frequently Asked Questions

EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch

Does the Router’s Internet connection support 100 Mbps Ethernet?

Because of the speed limitations of broadband Internet connections, the Router’s Internet port supports 10 Mbps 
Ethernet. It does, of course, support 100 Mbps over its auto-sensing 10/100 ports. 

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on your local network to one public address 
that is sent out to the Internet. This adds a level of security since the address of a PC connected to the network is 
never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet 
accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may 
have many private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 98, Windows 2000,or Windows XP?

Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of 
any non-Windows operating systems.

Does the Router support ICQ send file?

Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a firewall 
or proxy. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then send a file 
to a user behind the Router.

I set up an Unreal Tournament Server, but others on the network cannot join. What do I need to do?

If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the 
network’s computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. 
You can also use a port forwarding range of 7777 ~ 27900. If you want to use the UT Server Admin, forward 
another port (8080 usually works well but is used for remote admin. You may have to disable this.), and then in 
the [UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) 
and ServerName to the IP assigned to the Router from your ISP.

Can multiple gamers on the network get on one game server and play simultaneously with just one 
public IP address?

It depends on which network game or what kind of game server you are using.  For example, Unreal Tournament 
supports multi-login with one public IP.

mbps

 (

M

ega

B

its 

P

er 

S

econd): one million bits per 

second; a unit of measurement for data transmission

Summary of Contents for Linksys BEFVP41 v2




















































































Reviews:

No comments