25-33
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 25
Configuring ATM Router Module Interfaces
Configuring VC Bundling
Continue with the next section to confirm the VC bundle configuration and status.
Displaying the VC Bundle Configuration
To display the VC bundle configuration and status, use the following EXEC commands:
Examples
In the following example, the
show atm bundle
command displays the configuration of the VC bundle:
Switch#
show atm bundle cisco
cisco on ATM9/0/0.1: UP
Config Current Bumping PG/
VPI VCI X-Interface X-VPI X-VCI Preced. Preced. Preced./ PV Sts
Accept
2 200 ATM0/0/0 0 200 7 7 3 / Yes UP
2 201 ATM0/0/0 0 201 6 6 5 / Yes UP
2 202 ATM0/0/0 0 202 5 5 4 / Yes UP
2 203 ATM0/0/0 0 203 4 4 3 / Yes UP
2 204 ATM0/0/0 0 204 3 3 2 / Yes UP
2 205 ATM0/0/0 0 205 2 2 1 / Yes UP
2 206 ATM0/0/0 0 206 1 1 0 / Yes UP
2 207 ATM0/0/0 0 207 0 0 / Yes UP
Switch#
In the following example, the
show atm bundle stat
command displays the statistics for the VC bundle:
Switch#
show atm bundle cisco stat
cisco on ATM12/0/0.1: UP
VCI Rx-cells Tx-cells X-Interface X-VPI X-VCI Rx-cells Tx-cells
200 0 0 ATM0/0/0 0 200 0 0
201 1 1 ATM0/0/0 0 201 1 1
202 0 0 ATM0/0/0 0 202 0 0
203 0 0 ATM0/0/0 0 203 0 0
204 0 0 ATM0/0/0 0 204 0 0
205 0 0 ATM0/0/0 0 205 0 0
206 0 0 ATM0/0/0 0 206 0 0
207 0 0 ATM0/0/0 0 207 0 0
Switch#
Command
Purpose
show atm bundle
Shows the ATM VC bundle configuration.
show atm bundle
bundle-name
stat
Shows the ATM VC bundle statistics.
show running-config
Shows the ATM VC bundle configuration.