15-7
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 15
Configuring ATM Accounting, RMON, and SNMP
Configuring ATM Accounting
Configuring ATM Accounting Files
Direct the ATM accounting data being gathered from the configured selection control table to a specific
ATM accounting file. To configure the ATM accounting files and change to ATM accounting file
configuration mode, perform the following tasks, beginning in global configuration mode:
Note
Only one ATM accounting file can be configured and that file cannot be deleted.
Examples
The following example shows how to enable ATM accounting file configuration mode for acctng_file1
and reconfigure the collection mode on release of a connection:
Switch(config)#
atm accounting file acctng_file1
Switch(config-acct-file)#
collection-mode on-release
The following example shows how to enable ATM accounting file configuration mode for acctng_file1
and reconfigure the minimum age to the default value:
Switch(config)#
atm accounting file acctng_file1
Switch(config-acct-file)#
default min-age
The following example shows how to enable ATM accounting file configuration mode for acctng_file1
and configure a short description to be displayed in the
show atm accounting file
display and the file
header:
Switch(config)#
atm accounting file acctng_file1
Switch(config-acct-file)#
description Main accounting file for engineering
The following example shows how to enable ATM accounting file configuration mode for acctng_file1:
Switch(config)#
atm accounting file acctng_file1
Switch(config-acct-file)#
enable
Command
Purpose
Step 1
Switch(config)#
atm accounting file acctng_file1
Switch(config-acct-file)#
Specifies the ATM accounting file and enters
accounting file configuration mode.
Step 2
Switch(config-acct-file)#
collection-modes
[
on-release
] [
periodic
]
Configures when to write to the accounting file.
Step 3
Switch(config-acct-file)#
default
[
min-age
]
Resets the ATM accounting file configuration to
the default.
Step 4
Switch(config-acct-file)#
description
string
Configures a short description for the ATM
accounting file.
Step 5
Switch(config-acct-file)#
enable
Enables ATM accounting for a specific file.
Step 6
Switch(config-acct-file)#
failed-attempts
[
none
]
[
regular
] [
soft
]
Configures whether to record failed connection
attempts.
Step 7
Switch(config-acct-file)#
interval
seconds
Configures the interval for periodic collection, in
seconds.
Step 8
Switch(config-acct-file)#
min-age
seconds
Configures the ATM accounting file minimum
age of the VC.
