Cisco LightStream 1010, Configuration Manual

Page: 51 / 934

2-3
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 2 Understanding the User Interface
Accessing Each Command Mode
Interface range
configuration From global configuration
mode, specify a range of
interfaces to configure with an
interface range command.
Switch(config-if)#
To exit to global
configuration mode, use the
exit command.
To exit directly to privileged
EXEC mode, use the
end
command or press Ctrl-Z .
Subinterface
configuration From interface configuration
mode, specify a subinterface
with an
interface command.
Switch(config-subif)#
To exit to global
configuration mode, use the
exit command.
To exit directly to privileged
EXEC mode, use the
end
command or press Ctrl-Z .
Line configuration From global configuration
mode, specify a line with a
line command.
Switch(config-line)#
To exit to global
configuration mode, use the
exit command.
To exit directly to privileged
EXEC mode, use the
end
command or press Ctrl-Z .
Map-list configuration From global configuration
mode, define a map list with
the
map-list command.
Switch(config-map-list)#
To exit to global
configuration mode,
use the
exit command.
To enter map-class
configuration mode, use the
map-class command.
To exit directly to privileged
EXEC mode, use the
end
command or press Ctrl-Z .
Map-class configuration From global configuration
mode, configure a map class
with the
map-class command.
Switch(config-map-class)#
To exit to global
configuration mode,
use the
exit command.
To enter map-list
configuration mode, use the
map-list command.
To exit directly to privileged
EXEC mode, use the
end
command or press Ctrl-Z .
ATM router configuration From global configuration
mode, configure the PNNI
routing protocol with the
atm router pnni command.
Switch(config-atm-router)#
To exit to global
configuration mode, use the
exit command.
To exit directly to privileged
EXEC mode use the
end
command or press Ctrl-Z .
Table 2-1 Summary of Command Modes (continued)
Command Mode Access Method Prompt Exit Method