9-12
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 9
Configuring Resource Management
Configuring Global Resource Management
The
atm connection-traffic-table-row
command supports these service categories: CBR, VBR-RT,
VBR-NRT, ABR, and UBR. To create or delete an ATM CTT row, perform the following tasks in global
configuration mode:
Note
Your CTT feature set depends on the type of feature card that is installed on the Catalyst 8510 MSR and
LightStream 1010 ATM switch routers route processor.
If you do not specify an index row number, the system software determines if one is free and displays it
in the allocated index field if the command is successful.
Example
The following example shows how to configure an ATM CTT row with an ABR peak cell rate of
30,000 kbps:
Switch(config)#
atm connection-traffic-table-row abr pcr 30000
Allocated index = 63999
Displaying the ATM Connection Traffic Table
To display the CTT configuration, use the following EXEC command:
Example
The following example shows how to display the CTT configuration table:
Switch>
show atm connection-traffic-table
Row Service-category pcr scr/mcr mbs cdvt
1 ubr 7113539 none none
Command
Purpose
Step 1
Switch(config)#
atm
connection-traffic-table-row
[
index
row-index
]
{
vbr-rt
|
vbr-nrt
}
pcr
pcr-value
{
scr0
|
scr10
}
scr-value
[
mbs
mbs-value
] [
cdvt
cdvt_value
]
Configures an ATM CTT VBR row.
Step 2
Switch(config)#
atm
connection-traffic-table-row
[
index
row-index
]
cbr
pcr
pcr-value
[
cdvt
cdvt-value
]
Configures an ATM CTT CBR row.
Step 3
Switch(config)#
atm
connection-traffic-table-row
[
index
row-index
]
abr
pcr
pcr-value
[
mcr
mcr-value
] [
cdvt
cdvt-value
]
Configures an ATM CTT ABR row.
Step 4
Switch(config)#
atm
connection-traffic-table-row
[
index
row-index
]
ubr
pcr
pcr-value
[
mcr
mcr-value
] [
cdvt
cdvt-value
]
Configures an ATM CTT UBR row.
Command
Purpose
show atm connection-traffic-table
[
row
row-index
|
from-row
row-index
]
Displays the CTT configuration.
