2-16
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 2
Understanding the User Interface
Accessing Each Command Mode
Redundancy Configuration Mode (Catalyst 8540 MSR)
Redundancy configuration mode provides access to commands used to configure system redundancy and
EHSA operation.
To enter redundancy configuration mode from global configuration mode, use the
redundancy
command; the prompt changes to the ATM switch router’s hostname followed by (config-r):
Switch(config)#
redundancy
Switch(config-r)#
To exit ATM redundancy configuration mode and return to global configuration mode, use the
exit
command:
Switch(config-r)#
exit
Switch(config)#
To exit ATM redundancy configuration mode and return to privileged EXEC mode, use the
end
command or press
Ctrl-Z
:
Switch(config-r)#
end
Switch#
For detailed information on configuring system redundancy, see the
Testing the Configuration
section in
Chapter 3, “Initially Configuring the ATM Switch Router.”
Main CPU Configuration Mode (Catalyst 8540 MSR)
Main CPU configuration mode provides access to commands used to synchronize the configuration of
the primary and secondary route processors.
To enter main CPU configuration mode from redundancy configuration mode, use the
main-cpu
command; the prompt changes to the ATM switch router’s hostname followed by (config-r-mc):
Switch(config-r)#
main-cpu
Switch(config-r-mc)#
To exit ATM main CPU configuration mode and return to redundancy configuration mode, use the
exit
command:
Switch(config-r-mc)#
exit
Switch(config-r)#
To exit ATM main cpu configuration mode and return to privileged EXEC mode, use the
end
command
or press
Ctrl-Z
:
Switch(config-r-mc)#
end
Switch#
For detailed information on synchronizing configurations, see the
Testing the Configuration
section in
Chapter 3, “Initially Configuring the ATM Switch Router.”
