![background image](http://html.mh-extra.com/html/cisco/ios-xe/ios-xe_configuration-manual_64936079.webp)
Configuring ISG Access for PPP Sessions
Configuration Examples for ISG Access for PPP Sessions
9
Example
In the following example, the output of the debug subscriber packet detail command is filtered on the
basis of the username “[email protected]”:
Router# debug condition username [email protected]
Condition 1 set
Router# show debug
Condition 1: username [email protected] (0 flags triggered)
Router# debug subscriber packet detail
SSS packet detail debugging is on
Router# show debug
SSS:
SSS packet detail debugging is on
Condition 1: username [email protected] (0 flags triggered)
Router#
Configuration Examples for ISG Access for PPP Sessions
This section contains the following examples:
•
Configuring ISG Access for PPP Sessions: Example, page 9
•
VRF Transfer for PPP Sessions Using IPCP Renegotiation: Example, page 11
Configuring ISG Access for PPP Sessions: Example
The following example shows the configuration of an ISG policy that provides services to PPP
subscribers. This example configures ISG to perform the following actions:
•
PPP local termination
ISG will provide local termination by activating the service “ispa” for subscribers matching the
domain “ispa”. The system will authenticate the subscriber using method-list “list1”. For local
termination services, the global VRF is applied by default unless another VRF is specified in the
service profile, on the interface, or in the virtual template.
•
PPP authentication before forwarding
ISG will locally authenticate subscribers matching domain “ispb” before forwarding the sessions to
an LNS. (Sessions are forwarded to an LNS because service policy map “ispb” specifies a VPDN
group). The system will authenticate the subscribers using method-list “list2”.
•
PPP forwarding without local authentication
ISG will forward sessions to an LNS without local authentication for subscribers matching domain
“ispc”.
•
PPP domain exclusion
Summary of Contents for IOS XE
