manualshive.com logo in svg

Cisco IOS XE, Configuration Manual, Page: 332 / 358

Share
Download
Cisco IOS XE Configuration Manual Download Page 332

Configuring ISG Integration with SCE

  Configuration Examples for ISG Integration with SCE

12

Version: 1.0 

Conn up time: 00:04:00 

Conf keepalive: 0 

Negotiated keepalive: 1000 

Time since last keepalive: 00:04:00 

Remove owner on pull: TRUE 

Associated session details:

12.134.4.5session_guid_str 

12.34.4.5session_guid_str 

Configuration Examples for ISG Integration with SCE

This section contains the following examples:

•

ISG Control Bus Configuration: Example, page 12

•

ISG Integration with SCE: Example, page 12

•

SCE Control Bus Configuration: Examples, page 13

ISG Control Bus Configuration: Example

The following example shows how to configure the ISG control bus with the SCE management IP 
address and shared authentication key:

aaa server radius policy-device

client 10.10.10.10

key cisco

message-authenticator ignore

!

policy-peer address 10.10.10.10 keepalive 60

!

interface GigabitEthernet5/1/1

ip address 10.10.10.1 255.255.255.0

!

ISG Integration with SCE: Example

The following example shows how to configure two SCEs, each with the same authentication and 
accounting ports. ISG handles CoA messages on port 1700 for one SCE and on default port 3799 for the 
other SCE. Peering is maintained for each SCE with the ISG via different keepalive intervals.

When a user session starts, POLICY-LOCAL is applied. If the user’s profile at the AAA server has 
auto-logon, the session will begin using the SCE-SERVICE-LOCAL service. This service has the SCE 
service-monitor facility enabled. If the user profile does not specify auto-logon to the 
SCE-SERVICE-LOCAL service, SCE will use its default values for the policy-name argument and the 
service-monitor command, which are configured at the SCE.

aaa accounting network service_acct start-stop group radius

aaa accounting network session_acct start-stop group radius

aaa server radius policy-device

 authentication port 1343

 accounting port 1345

 message-authenticator ignore

 client 10.10.10.1 port 1341 key cisco

Summary of Contents for IOS XE







































































































































































































































































































































































Reviews:

No comments