Cisco IOS XE, Configuration Manual

Page: 266 / 358

Configuring ISG Support for Prepaid Billing
How to Configure ISG Support for Prepaid Billing
9
SUMMARY STEPS
1. enable
2.
configure terminal
3. policy-map type service policy-map-name
4. [priority] class type traffic class-map-name
5. prepaid config name-of-configuration
6. end
7. show subscriber session [detailed] [identifier identifier | uid session-id | username name]
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
policy-map type service policy-map-name
Example:
Router(config)# policy-map type service mp3
Creates or defines a service policy map, which is used to
define an ISG service, and enters service policy-map
configuration mode.
Step 4
[priority] class type traffic class-map-name
Example:
Router(config-service-policymap)# class type
traffic class-acl-101
Associates a previously configured traffic class with the
policy map, and enters control policy-map traffic class
configuration mode.
Step 5
prepaid config name-of-configuration
Example:
Router(config-control-policymap-class-traffic)#
prepaid config conf-prepaid
Enables ISG support for prepaid billing and applies a
configuration that defines the prepaid billing parameters.
Note
The presence of this command does not guarantee
that prepaid billing will be applied to the flow. This
command causes the first prepaid authorization
request. Whether prepaid billing will be applied to
the flow is determined by the billing server.