Cisco IOS XE, Configuration Manual

Page: 244 / 358

Configuring ISG Accounting
How to Configure ISG Accounting
12
What to Do Next
You may want to configure a method of activating the service policy map or service profile; for example,
control policies can be used to activate services. For more information about methods of service
activation, see the module “Configuring ISG Subscriber Services.”
Troubleshooting Tips
The following commands can be used to troubleshoot ISG accounting:
•
debug aaa accounting
• debug radius [brief]
•
debug subscriber feature name accounting {event | error | detail}
Configuring ISG Postpaid Tariff Switching
ISG postpaid tariff switching can be configured in the following configuration source:
•
Service Profile on a AAA server
If you include a traffic class in the service profile, postpaid tariff switching will apply to the specified
flow. If you do not configure a traffic class, postpaid tariff switching will apply to the session. Perform
this task to configure per-session or per-flow postpaid tariff switching.
Prerequisites
ISG per-session or per-flow accounting must be configured in order for postpaid tariff switching to work.
SUMMARY STEPS
1. Cisco-AVpair = “PPWhh:mm:ss:days”
2.
Cisco-AVpair = "ip:traffic-class={in | out} access-group [acl_number | name acl_name] [priority
n]"
DETAILED STEPS
Step 1
Cisco-AVpair = “PPWhh:mm:ss:d”
Add the Post Paid Vendor-Specific Attribute (VSA) to the service profile. This attribute specifies the
weekly tariff-switch points for postpaid tariff switching. The syntax description follows:
hh:mm:ss:d—Weekly tariff-switch time.
• hh = hour of day <0–23>
•
mm = minutes <0–59>
• ss = seconds <0–59>
•
d = bitmap format for the days of week. Each weekday is represented by one bit, as follows:
00000001 = Monday
00000010 = Tuesday
00000100 = Wednesday