manualshive.com logo in svg

Cisco IOS XE, Configuration Manual, Page: 149 / 358

Share
Download
Cisco IOS XE Configuration Manual Download Page 149

Configuring ISG as a RADIUS Proxy

  Information About ISG RADIUS Proxy

3

Sessions that were created using ISG RADIUS proxy operation are generally terminated by receipt of 
an Accounting-Stop packet. 

ISG RADIUS Proxy Handling of Accounting Packets 

By default, ISG RADIUS proxy responds locally to accounting packets it receives. The accounting 
method-list command can be used to configure ISG to forward RADIUS proxy client accounting 
packets to a specified server. Forwarding of accounting packets can be configured globally for all 
RADIUS proxy clients or on a per-client basis.

RADIUS Client Subnet Definition

If ISG is acting as a proxy for more than one client device, all of which reside on the same subnet, the 
clients may be configured using a subnet definition rather than a discrete IP address for each device. This 
configuration method results in the sharing of a single configuration by all the client devices. 

ISG RADIUS Proxy Support for Mobile Wireless Environments

ISG RADIUS proxy uses mobile wireless-specific processes to provide support for Gateway General 
Packet Radio Service (GPRS) Support Node (GGSN) environments. The following sections describe 
ISG RADIUS proxy attribute support and processing:

•

Attribute Processing and RADIUS Request Correlation, page 3

•

3GPP Attribute Support, page 4

Attribute Processing and RADIUS Request Correlation

When authentication and accounting requests originate from separate RADIUS client devices, ISG uses 
correlation rules to associate all the requests with the appropriate session. The association of the 
disparate RADIUS flows with the underlying session is performed automatically when the 
Calling-Station-ID (Attribute 31) is sufficient to make the association reliable.

In mobile wireless environments attribute processing and the correlation of RADIUS requests with a 
session are implemented differently than in a PWLAN environment. For example, in a PWLAN 
environment the Attribute 31 is a MAC address, and in a GGSN environment Attribute 31 is a Mobile 
Station Integrated Services Digital Network (MSISDN), which is a plain number or alphanumeric string. 
In addition, in a GGSN environment the correlation of RADIUS requests can be performed using 
attributes other than Attribute 31.

ISG RADIUS proxy supports mobile wireless environments by allowing you to specify whether the 
RADIUS-proxy client uses a MAC or MSISDN format for Attribute 31. The format is specified using 
the calling-station-id format command. In addition, you can use the session-identifier command to 
configure ISG RADIUS proxy to use other attributes (apart from Attribute 31) to perform RADIUS 
request correlation.

Summary of Contents for IOS XE







































































































































































































































































































































































Reviews:

No comments