manualshive.com logo in svg

Cisco IOS XE, Configuration Manual, Page: 277 / 358

Share
Download
Cisco IOS XE Configuration Manual Download Page 277

Configuring ISG Support for Prepaid Billing

  Feature Information for ISG Support for Prepaid Billing

20

Note

Table 16

 lists only the Cisco IOS XE software release that introduced support for a given feature in a 

given Cisco IOS XE software release train. Unless noted otherwise, subsequent releases of that Cisco 
IOS XE software release train also support that feature. 

CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, 
Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, 
Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; 
Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, 
and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, 
CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, 
Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, 
EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, 
Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, 
PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are 
registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. 

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply 
a partnership relationship between Cisco and any other company. (0910R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any 
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. 
Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2006–2009 Cisco Systems, Inc. All rights reserved.

Table 16

Feature Information for ISG Support for Prepaid Billing

Feature Name

Releases

Feature Configuration Information

ISG: Accounting: Prepaid

Cisco IOS XE Release 2.5.0

ISG prepaid billing support allows ISG to check a subscriber’s 
available credit to determine whether to allow the subscriber 
access to a service and how long the access can last. ISG 
supports volume-based and time-based prepaid billing.

The following sections provide information about this feature:

•

Information About ISG Prepaid Billing Support, page 2

•

How to Configure ISG Support for Prepaid Billing, page 4

Summary of Contents for IOS XE







































































































































































































































































































































































Reviews:

No comments